Русско-английский научно-технический словарь

при

см. тж. во время; встречающийся при; по мере; после

I (α, φ)200 is the intensity of the 200 reflection at a given α and φ.

The engine develops 340 hp at 1900 rpm.

For a given centre distance, the length of a crossed belt will be a constant.

In starting up, the starter should be set at ...

Certain precautions must be taken to obtain satisfactory results in using this equipment.

On ignition the ingredients must vaporize.

On interruption of the electric current the valve closes instantly.

The temperature is read (up)on entering and leaving the water jacket.

Bentonite shrinks upon drying.

When added to aluminium, germanium produces a better hardening effect than silicon.

When employing these compounds as fuel additives, we ...

When tuning a system for optimum performance one must ...

With an overall length of 18 ft the machine weighs 15 tons.

The compressor operates with one suction valve open.

Both shot core drilling and rotary drilling methods are used in shaft drilling.

Given comparable costs for raw materials, the manufacturing cost is determined largely by the weight of the component.

The breakdown of bias voltage decreases by a few tenths of a millivolt for every °C increase in temperature.

With the proper combination of resistors and capacitors, the voltage will be ...

With (or In) this method, the amount of material to be removed can be closely controlled.

Given the extraordinary resolution of the Space Telescope, it is possible to detect ...

The conductance increases linearly with the addition of H+.

The lower inertia of the cone clutch elements permits rapid reversal with low energy loss.

In moving through the tube the atoms collide with ...

The potential energy is taken as zero for (or as, or with, or when) a → ∞, ...

The equation is useful in comparing diffusion currents from electrodes with different capillary characteristics.

Neutron stars are apparently born in the explosions of supernovas.

Such a function is real for real z.

Русско-английский научно-технический словарь